Web Menu

Product Search

Language

Share

Home / News / Industry News

Industry News

View Products Contact Us
  • Industry News

    Fan and Pad System vs Mist Cooling System: Which Best Suits Your Site?

    A 1,000 m² poultry house and a 120 m² restaurant terrace almost never look like the same problem, yet the same two quotes tend to land on the table: a fan and pad system, or a mist cooling line. Both cool by evaporating water, both cost far less to run than a compressor-based air conditioner, and both fail in predictable ways when the site does no...

    Nov 06, 2026
    View details
  • Industry News

    Cooling Pad Thickness 100mm vs 150mm: A Practical Selection Guide for Poultry Growers

    A poultry farm in Ningbo replaced its 100mm evaporative cooling pads with 150mm pads last summer, expecting a dramatic drop in barn temperature. The result? The barn stayed cooler in the hottest hours, but the exhaust fans had to work harder, and the retrofit required new frames and deeper water troughs. That experience sums up the 100mm vs 150mm ...

    Oct 30, 2026
    View details
  • Industry News

    Cooling Pad Storage Before Installation: How to Protect Evaporative Pads

    A pallet of 5090 honeycomb pads arrives at the job site three weeks before the cooling wall is framed. The crew leaves it banded under a lean-to beside the water tank. On installation day the pads still look intact, but the wall runs warm along the bottom third, water channels instead of spreading, and someone blames the pump. The pump is fine. Th...

    Oct 23, 2026
    View details
  • Industry News

    Cooling Pad for Flower Greenhouse: How to Size and Specify 7090 Cellulose Pads

    Cooling Pad Sizing for a Flower Greenhouse: The Short Answer If your flower greenhouse touches 35 °C on a July afternoon and the roses are dropping petals two days early, a bigger fan is usually the wrong purchase. For a 500 m² Venlo house needing roughly 30,000 m³/h of ventilation air, a 100–150 mm cross-fluted cellulose cooling pad sized at abou...

    Oct 16, 2026
    View details
CONTACT US